Down jacket fabric knowledge
Tiempo de liberación:
2022-07-27
There are generally the following kinds of down jacket fabrics on the market. Light and thin is a popular trend, such as 380T nylon spinning. The square meter weight of fabric is about 35G, which is mostly chemical fiber fabric. There is also a kind of memory fabric or anti-memory fabric that also uses more fabric with a square meter weight of about 120G, which is relatively thick and down, generally, there are duck (gray and white) down and goose down (gray and white). The proportions are generally 90/10,80/20 and 50/50. The proportion of down is in front and other fillers are behind. Of course, the high proportion is of good quality and good warmth retention.
Down jacket fabric knowledge
There are generally the following kinds of down jacket fabrics on the market. Light and thin is a popular trend, such as 380T nylon spinning. The square meter weight of fabric is about 35G, which is mostly chemical fiber fabric. There is also a kind of memory fabric or anti-memory fabric that also uses more fabric with a square meter weight of about 120G, which is relatively thick and down, generally, there are duck (gray and white) down and goose down (gray and white). The proportions are generally 90/10,80/20 and 50/50. The proportion of down is in front and other fillers are behind. Of course, the high proportion is of good quality and good warmth retention. However, the general down jacket has a small amount of fur penetration, "fur penetration" I wonder if you mean the down drill I understand, that is, the down drill runs outside through the gap between the fabrics. If so, it is generally the following two situations. Down is drilled through the thread or stitches on the fabric. This situation is generally the majority. It can be prevented from the thickness of the needle in the clothing factory, but it is only prevented, but it cannot be avoided. The other is directly through the fabric itself, which should be adjusted from the selection of the fabric, such as calendering and coating on the back of the fabric, the general coating effect will be better. Down jacket fabrics should have anti-cashmere, windproof and breathable properties, especially anti-cashmere is essential. The quality of the anti-lint performance depends on the yarn count density of the fabric used. At present, nylon taffeta and TC cloth are the main products sold in the market. Generally, the yarn count is above 230T, preferably 250T, and below 230T it is difficult to ensure that the fluff is not drilled. When identifying fabrics, first look at their thickness. Generally, the thickness is thin and the thickness is dense. The second is to beat with your hands. If fluff flies out, the density must be below 230T. Again, hold a certain part of the clothes and rub it slightly (of course, ask the salesperson for approval). If there is no small velvet, the density should be 250T. Because nylon thick fabric has a layer of paint, its treatment is bright, smooth and uniform.
Yi Ming encaje por ti, tan maravilloso
Paño Co., Ltd del cordón de Shantou Yiming
Contacto: Miss Huang
Correo electrónico: 13501417281@138.com
Dirección 402A, Room 401, Building B, Jusheng Building, N ° 25 Science and Technology Middle Road, Shantou High-tech Zone
Empresa WeChat
Copyright©Paño Co., Ltd del cordón de Shantou Yiming
Palabras clave: Encaje de encaje, tela de encaje